- Handymagnet, the Fridge magnet.
-
Handy-magnet can be cut into various lengths as needed. So by cutting one single magnet out of the roll you end up with a super strong fridge magnet to hold any child photo award or your favorite recipe to the fridge for easy viewing. Many sheets can be held between the magnet and the fridge or any steel board such as a magnetic white board or garden shed. If you need it stronger use more magnets.
Handy Magnet can be cut in various lengths and have several attachments.
If you really want to hold a massive amount of paper to the wall, whiteboard or fridge then the best solution is to turn Handy magnet into a magnetic bulldog clip.
International Patents Apply
- Directions for Handy-magnet Bulldog clip.
-
You will need:
- Handymagnet
- Standard clip from a stationary supplier
- Staple and Stapler or PVC glue or sewing needle and thread
Cut a section of Handy Magnet containing one magnet with approximately 30 mm of plastic each side of the magnet. Push the looped handle on the Clip up inside the opening between the plastic sheets of the Handymagnet and staple, stitch or glue the plastic sheets together inside the loop of the handle forming a loop securing the HandyMagnet to the clip. If you need it stronger use more magnets.
Handymagnet can be attached to almost anything to make it useful and convenient. For example add Handy magnet to a string and you could hold anything to the fridge.
International Patents Apply
- Directions for Handy-magnet String Holder.
-
You will need:
- Handymagnet
- String from a stationary, craft or hardware supplier
- Staple and Stapler or PVC glue or sewing needle and thread
Cut a section of Handymagnet containing one magnet with approximately 30 mm of plastic either side of the magnet. Position the string loop approximately half way up the plastic end (approx 15 mm). Bend half the plastic end back on itself over the string and back to the magnet and staple, stitch or glue the plastic lip back onto itself forming a loop securing the Handy-magnet to the string. If you need it stronger use more magnets.
International Patents Apply
- Handy-Magnet, the Water conditioning magnet.
-
Heard about the benefits of magnetically conditioned water? Well there are many. Using Handymagnet makes the lot cheaper.
What about having all the magnetized water you want without having to keep on paying any extra for it.
Attach Handy magnet to bottled water and turn it into Magnetic Water. It may take time for the magnetic influence to get to all the water in the bottle so leave it attached for a more complete penetration.
Attach Handy-magnet to your tap water and turn it into Magnetic Water.
International Patents Apply
- Directions for Handymagnet Magnetic Bottled water.
-
You will need:
- Handymagnet
- Bottled Water or tap water bottled
- Adhesive tape
Cut a section of Handy magnet containing one or more magnets with approximately 30 mm of plastic either side of the magnet. Position the magnet on the side of the bottle. The magnet should be preferably low down the bottle so the magnet stays below the water line for maximum effect. Then use Adhesive tape to hold the Handymagnet in place. If you need it stronger use more magnets.
International Patents Apply
- Directions for Handy Magnet Magnetic Tap water.
-
You will need:
- Handy-magnet
- Adhesive tape
NOTE: The pipe that the Handymagnet is attached to must be non-magnetic, such as plastic, copper or aluminum. You can verify this by placing a magnet on the pipe and testing if it sticks to the pipe. The magnet should not show any attraction tendencies to the pipe.
Cut a section of Handy Magnet containing one or more magnets with approximately 30 mm of plastic either side of the magnet. There are a few ways of doing this.
- Attracting magnets. This provides higher concentrated magnetic fields in the fluid. Position one set of magnets on the side of the pipe or hose. Secure the magnets in position using Adhesive tape. Position a second equal set of magnets on the opposite side of the pipe aligning the magnets. Make sure the second set of magnets have a tendency to be attracted to the first set through the pipe. If they repel, turn the second set of magnets over to the opposite side. Position the second set on the pipe and hold in place with magnets aligned while securing them in position with adhesive tape.
|
|
- A coil of magnets. Cut an appropriate length of Handy magnet. Position the magnet at about 45 degrees to the axis of the pipe. Stick one end of the Handy-magnet to the pipe and continue taping the Handymagnet around the pipe until you get to the last magnet. Secure this end to the pipe using Adhesive tape.
|
|
We know that the total effect is related to the magnetic field strength and the volume of fluid contacted so if you need to increase the effect use more magnets.
International Patents Apply
- Do It Yourself Magnetic Therapy With Handymagnet.
-
Simple inexpensive ways to make effective therapy products with the benefits of super strong magnets (Neodymiums).
With Handy magnet’s vinyl covering, it enables you to; sew it, staple it, pin it, clasp it, string through and tie it, sticky tape it, bandaid it and much more.
Add Velcro or elastic or both and you have the tools to produce a magnetic therapy aid for any part of the body.
Sew HandyMagnet onto cushioned fabrics and you have a Magnetic Pillow Pad or Underlay or Pet Bed, Car Seat Cushion etc.
International Patents Apply
- Simple Handy magnet Therapy Strip.
-
International Patents Apply
- Handymagnet Therapy Pillow Pad.
-
You will need:
- Two Handy-magnet strips.
- One cushion or pillow with removable cover.
- Needle and cotton.
Step 1: Remove cover from the cushion pad. You can use any type of cushion or even a normal pillow.
Step 2: Cut two Handymagnet strips to fit length of pad placing them parallel and spacing for even coverage.
Step 3: Sew strips onto pad to keep from moving around. Any type of stitch will do.
Step 4: One side of each strip sewn is enough to keep Handymagnet secure on the cushion pad.
Step 5: Replace cushion cover or pillowcase.
Your multi-purpose Magnetic Pillow Therapy aid. For the relief aches, pains and stiffness you can use your Handy magnet Pillow to: sit on, lean your back on, lean your legs, feet, head or arms on.
Can be used; at home, in the office, in the car, outdoors etc
While you are; fishing, picnicking, watching TV, working on the computer, sleeping, travelling etc.
International Patents Apply
- Handymagnet Therapy Headband.
-
You will need:
- One strip of Handy magnet.
- Fabric (enough to cover strip).
- 32mm width elastic.
Step 1: Cut a strip of Handy-magnet length measuring on forehead from temple to temple.
Step 2: Cut fabric to cover Handy magnet.
Step 3: Join fabric sides together, covering strip and sew together.
Step 4: Sew length of fabric leaving opening on either side.
Step 5: Cut elastic length to give a firm fit around the head with Handy-magnet strip. Expose part of the strip and place on elastic end.
Step 6: Sew strip onto elastic ends then pull fabric back over joined piece to cover.
You have a Magnetic Therapy Headband for the relief of tension, headaches, migraines and insomnia that can be worn any time of day or night. Can be worn on front or back of head depending on pain locality.
International Patents Apply
- Handymagnet Therapy Sinus Band.
-
You will need:
- One Handy magnet Strip (four magnets long).
- Needle & Cotton.
- Fabric (enough to cover strip).
- Elastic (3mm wide – enough to double around back of head from ear to ear).
- Scissors.
Step 1: Cut a length of Handy-magnet strip containing four magnets.
Step 2: Cut a piece of fabric, enough to cover strip.
Step 3: Join fabric over strip lengthways and sew along.
Step 4: Leave opening on either side.
Step 5: Place the two middle magnets onto either side of the nose and pinch the gaping vinyl and fabric section at the top part of the bridge of the nose.
Step 6 & 7: Sew a backstitch about a half centimetre deep onto pinched area to secure.
Step 8: Pull out a section of the end of Handymagnet strip, fold over lengthways and make a small incision.
Step 9: Take one elastic end and pull through slit then pull through the other.
Step 10: Join elastic by tying a knot with the ends leaving a double elastic back strap.
You now have a very effective sinus band. It will sit comfortably just under the eyes and the magnets on the conchal area (sides of nose) to aid the pain associated with sinus and cold and flu symptoms. The magnets will reduce inflammation in the area also providing easier breathing.
Will also aid in pain in the upper cheek and ear area. The Do It Yourself Handymagnet Therapy Sinus Band is perfect for those uncomfortable sleepless nights.
International Patents Apply
- Magnetic Therapy Underlay With Handy magnet.
-
You will need:
- One thin eggshell-shaped foam mattress.
- Two 700mm Handymagnet strips (depending on the coverage desired).
- Tarzans Grip (or any type of rubbery glue) or needle and cotton.
Step 1: Take an eggshell shaped foam mattress, ensuring you have enough space to work on.
Step 2: Cut singular pieces from the Handy-magnet strips.
Step 3: Place each one onto the mattress leaving roughly 8 inches gap between them.
Step 4: Spread them all out evenly before securing them down by either gluing or sewing into the grooves of the eggshells, enough for them to stay in place when there is weight and movement on them.
Place the mattress under your sheet and you have a magnetic underlay that will produce good circulation, thus providing ease of aches and pains resulting in many wonderful nights sleep. Magnetic underlays are especially beneficial for arthritic sufferers.
International Patents Apply
- Magnetic Scarf with Handymagnet.
-
You will need:
- One Handy magnet Strip.
- One Scarf.
- Safety Pins.
Step 1: Flatten out the scarf with the inside facing up. Take a Handymagnet strip and place it onto the middle, top section.
Step 2: Roll the scarf around the magnetic strip ensuring an even roll all the way to the end.
Step 3: Secure safety pins along the edge of the scarf about 15cm apart from one end of the strip to the other.
You have made a very simple and elegant magnetic scarf that attaches to itself, just wrap it around your neck either to the front or sides and snap together two magnets and position as desired. No need for tying or securing with brooches.
You can socialise while wearing an attractive accessory that is also acting as a pain-reducing aid. As you go about your daily or nightly tasks, the magnets are working on your neck and shoulders, producing good, effective circulation and pain-free bliss.
International Patents Apply
- Magnetic Back Belt.
-
You will need:
- One Handy Magnet Strip.
- Fabric (enough to cover strip).
- 32mm wide elastic.
- Velcro strips.
- Needle & cotton or sewing machine.
Step 1: Cut a strip of Handy magnet long enough to cover back area. Cut enough fabric to cover the strip.
Step 2: Fold the fabric over and sew all the way along to keep it secure around the strip.
Step 3: Cut elastic length from the measurement of the combined strip and elastic around the back to the front (this should be a loose comfortable fit). Then cut the elastic in half.
Step 4: Machine or hand-sew the ends of the elastic onto the ends of the Handy-magnet.
Step 5: Take the two opposing Velcro strips and sew them along the edges onto the elastic ends.
NB: Sew them on the opposite sides of each elastic to make the attachment work without twisting the belt.
You have a multi-functional magnetic back belt. It can be worn underneath or over your clothing. The easily-adjustable attachment allows you to wear the belt anywhere on your back area, covering the upper-back, lower-back, middle-back or hips.
You can also wear the magnetic back-belt diagonally across the back. this one is great for office workers or anyone who suffers from tension around the shoulders (trapezius), back of neck and under the shoulder blade (scapula). Apply two and you have a wonderful coverage and can work away in luxurious comfort.